Current location：Home page > Solution > LCD blow dry the metal back plate
LCD blow dry the metal back plate
Airhank learned that domestic LCD manufacturers use compressed air and high pressure air blower as air source for drying, whether imported or domestic back panel cleaning equipment. Often the total power of the gas source is more than 100kW, and the drying effect of the LCD metal backplane can only be barely used.
In a large domestic TV accessories manufacturer, the original drying cleaning production line, a total of 12 installed The 7.5kW high pressure air blower is equipped with 20 800mm long air knives. The drying effect is good or bad. The on-site operators have no consciousness of maintenance and install unreasonable filtering system. Sometimes the defective rate of metal back plate is increased due to air pollution, and the high-pressure fan is easy to be damaged. For this reason, Airhank provides a high speed air blower and blade system, which is equipped with three hank-100 11kw high speed air blower and 12 800mm Long Precision Air Knife. The drying effect of the back plate is significantly improved, and the high-precision filter is provided according to the site conditions, which can not only ensure the safe operation of the high speed air blower system, but also improve the cleanliness of the air source, effectively improve the product qualification rate and reduce the production cost.
Name of air blower | high pressure air blower | high speed centrifugal blower |
Number of air blower(platform） | 12 | 3 |
Number of Air Knife（hold） | 20 | Precision air knife 12 |
Single air blower power（Kw） | 7.5 | 11 |
Total power consumption（Kw） | 90 | 33 |
Hourly tariff | ￥76.5 | ￥28.05 |
Daily electricity consumption（24 hour） | ￥1836 | ￥673.2 |
Monthly electricity consumption（30 day） | ￥55，080 | ￥20，196 |
Annual electricity consumption（365 day) | ￥660， 960 | ￥242,352 |
Airhank high speed air blower and air knife system are adopted to save energy every year（RMB) | ￥418， 608 | |
Contact us quickly
Do you have any questions about air drying system and fluid solutions，Contact：+86 (0769) 2311 5899 Mail：hank@airhank.com
*Please fill in the requirement information carefully,We will contact you within 24 hours.
Dongguan Airhank Electrical Technology Co., Ltd.
15 years focus on air drying and fluid solutions
Industrial Air Blower
Wind Knife And Air Knife
Address：3/F, Wanhang Industrical Park, Niushan New Village,Dongcheng Street,
Dongguan City,
Guangdong Province,
China
Mobile：+86 15920245670
Fax：+86 （0769）2311 5099
E-mail：yana@airhank.com
COPYRIGHT ? 2014-2017 Dongguan Airhank Electrical Technology Co., Ltd. All Rights Reserved.
Dongguan Airhank Electrical Technology Co., Ltd.
3/F, Wanhang Industrical Park, Niushan New Village,Dongcheng Street,
Dongguan City,
Guangdong Province,
China
